LoveUnix » AIX -IBM小机基本技术 » IBM P6 550 升级cpu

westmstc 发表于 2010-9-7 19:56

IBM P6 550 升级cpu

新手
原来是一个扳子上面2个CPU，16G 内存，现在加两块扳子，每个上面2个cpu,8G  内存。
没有HMC 管理机，没有做LPAR。就一个单台服务器

怎么激活新加的cpu,有激活码。

wenjiafan 发表于 2010-9-7 20:01

用网线接550的HMC口，打开ASM去激活

westmstc 发表于 2010-9-7 20:09

HMC口 有没有默认IP 地址，现在没有显示器，串口线也没，只有网线。

小猪 发表于 2010-9-7 20:14

[url]http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/ipha2/ipha2kickoff.htm[/url]

Guluu 发表于 2010-9-7 20:16

小猪，小肥猪。哈哈。

Guluu 发表于 2010-9-7 20:16

会下蛋的猪猪，猪猪中的战斗猪，耶。。。。。

小猪 发表于 2010-9-7 20:27

[url]http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/iphdx/p6_workingwithconsoles.htm[/url]

Activating Capacity on Demand or PowerVM
You can use the Advanced System Management Interface (ASMI) to activate Capacity on Demand processors or memory, or enable PowerVM™ features (formerly known as Advanced POWER® Virtualization).

When you obtain processor or memory activation features, you receive an activation key that you use to activate your inactive processors or memory.
If your system did not come with the PowerVM feature enabled, you must use the ASMI to enter the activation code that you received when you ordered the feature. This activation code also enables you to use the Micro-Partitioning™ feature on the system.

To perform this operation, you must be one of the following authority levels:
Administrator
Authorized service provider
To permanently activate some or all of your inactive processors or memory, do the following steps:

On the ASMI Welcome pane, specify your user ID and password, and click Log In.
In the navigation area, expand On Demand Utilities.
Select CoD Activation.
Enter the activation key into the field.
Click Continue. If you entered the code for the PowerVM feature, the feature is enabled. If you entered the code for Capacity on Demand, perform the specified operation.

westmstc 发表于 2010-9-7 21:32

刚刚激活了，现在能在系统里面看到6 个cpu,但是内存有问题，只认到24G，少了8G
有四组 报 System-deconfigured By association (E8)，是没接好的原因吗？[code]
7 U78A0.001.DNWHK07-P1-C13-C9 2048 MB Configured None (0)  Configured Deconfigured   
8 U78A0.001.DNWHK07-P1-C14-C2 2048 MB System-deconfigured By association (E8)  Configured Deconfigured   
9 U78A0.001.DNWHK07-P1-C14-C7 2048 MB System-deconfigured By association (E8)  Configured Deconfigured   
10 U78A0.001.DNWHK07-P1-C15-C2 2048 MB Configured None (0)  Configured Deconfigured   
11 U78A0.001.DNWHK07-P1-C15-C7 2048 MB Configured None (0)  Configured Deconfigured   
12 U78A0.001.DNWHK07-P1-C14-C4 2048 MB System-deconfigured By association (E8)  Configured Deconfigured   
13 U78A0.001.DNWHK07-P1-C14-C9 2048 MB System-deconfigured By association (E8)  Configured Deconfigured   
14 U78A0.001.DNWHK07-P1-C15-C4 2048 MB Configured None (0)  Configured Deconfigured   
15 U78A0.001.DNWHK07-P1-C15-C9 2048 MB Configured None (0)  Configured Deconfigured   
[/code]

老农 发表于 2010-9-8 00:23

550的内存我记得是没激活码的，ASMI进去激活看看

chengyiliu 发表于 2010-9-8 14:32

还是有个HMC方便。

westmstc 发表于 2010-9-8 17:01

和内存厂商有关系吗，c14 通道上面有三根是一个厂家的，另外一个是现代的
amsi 进去  内存 选Configured  保存不了

老农 发表于 2010-9-8 17:37

哦，原来如此啊？
一组内存必须PART NUMBER一样
你这显然不一样

lex_wang 发表于 2010-9-8 18:08

路过，学习中………………

abit2007 发表于 2010-9-12 16:01

学习中，谢谢，问题经典。

查看完整版本: IBM P6 550 升级cpu