solrais通过scsi连接3S9800存储问题

有台sun v490的机器，solaris9 ，通过scsi连接3s9800存储（国产货）
划好raid，lun，map以后vi /kernel/drv/sd.conf
使他能认到超过足够的lun...
boot -r 后发现，format是认到lun了，但是format大于2t的那个，
[font=宋体][size=10.5pt][color=#000000]format > partltion[/color][/size][/font]
[font=宋体][size=10.5pt][color=#000000]提示不可识别的type[/color][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000]format > type[/color][/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000]0 Autoconfigure[/color][/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000]1 Other[/color][/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000]选0退出，[/color][/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000]other则[/color][/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt]提示 enter jts Enter Maxinum Number Of LBAS
number：[/size][/font][/size][/font]
[font=宋体][size=10.5pt]
[/size][/font]
[font=宋体][size=10.5pt]
[/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt]开始怀疑是否大于2t的问题，后来换个小的[/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt]却又变成了提示要球输入cycle..什么的然后一堆东西要手动输入[/size][/font][/size][/font]
[font=宋体][size=10.5pt]
[/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt]iostat -El [/size][/font][/size][/font]
[font=宋体][size=10.5pt][font=宋体][size=10.5pt]能识别硬盘为3s9800[/size][/font][/size][/font]
[font=宋体][size=10.5pt]
[/size][/font]
[font=宋体][size=10.5pt]
[/size][/font][font=宋体][size=10.5pt][font=宋体][size=10.5pt]这是scsi卡驱动问题还是？阵列问题？..[/size][/font][/size][/font]
[font=宋体][size=10.5pt]
[/size][/font][font=宋体][size=10.5pt][font=宋体][size=10.5pt][color=#000000][/color][/size][/font][/size][/font]

大于2T是不行的，本来也不应该那么大。

是cylinder,不是cycle吧？这是在自动识别不确定的时候需要手动做的。

是的，只是记不清了，不知道怎么去计算。
看来是识别的不好的问题了，没碰到过，
不懂solaris也要去做。：（

Solaris 9应该是可以大于1Tb的,但是在做文件系统的时候(newfs)要加个-T参数

现在partltion都划不出来，改天再看看还不到newfs这步..

最好还是别大于1T吧。
cylinder sector head

下面lun<800G,并且手工指定cylinders，sec等...但还是报错，回公司。再想想还有什么办法

[color=Red]所有信息[/color]
# format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
          /pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c3ca9536,0
       1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
          /pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w21000014c3ca8f39,0
       2. c2t1d0 <drive not available>
          /pci@8,600000/scsi@1/sd@1,0
       3. c2t1d1 <drive not available>
          /pci@8,600000/scsi@1/sd@1,1
       4. c2t1d2 <drive not available>
          /pci@8,600000/scsi@1/sd@1,2
Specify disk (enter its number): 4



AVAILABLE DRIVE TYPES:
        0. Auto configure
        1. Quantum ProDrive 80S
        2. Quantum ProDrive 105S
        3. CDC Wren IV 94171-344
        4. SUN0104
        5. SUN0207
        6. SUN0327
        7. SUN0340
        8. SUN0424
        9. SUN0535
        10. SUN0669
        11. SUN1.0G
        12. SUN1.05
        13. SUN1.3G
        14. SUN2.1G
        15. SUN2.9G
        16. Zip 100
        17. Zip 250
        18. SUN146G
        19. other
Specify disk type (enter its number): 19
Enter number of data cylinders: 65535
Enter number of alternate cylinders[2]:
Enter number of physical cylinders[65537]:
Enter number of heads: 24
Enter physical number of heads[default]:
Enter number of data sectors/track: 233
Enter number of physical sectors/track[default]:
Enter rpm of drive[3600]: 10000
Enter format time[default]: 5
Enter cylinder skew[default]:
Enter track skew[default]:
Enter tracks per zone[default]:
Enter alternate tracks[default]:
Enter alternate sectors[default]:
Enter cache control[default]:
Enter prefetch threshold[default]:
Enter minimum prefetch[default]:
Enter maximum prefetch[default]:
Enter disk type name (remember quotes): 3S9800
selecting c2t1d2
[disk unformatted]


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> p


PARTITION MENU:
        0      - change `0' partition
        1      - change `1' partition
        2      - change `2' partition
        3      - change `3' partition
        4      - change `4' partition
        5      - change `5' partition
        6      - change `6' partition
        7      - change `7' partition
        select - select a predefined table
        modify - modify a predefined partition table
        name   - name the current table
        print  - display the current table
        label  - write partition map and label to the disk
        !<cmd> - execute <cmd>, then return
        quit
partition> p
Current partition table (3S9800):
Total disk cylinders available: 65535 + 2 (reserved cylinders)

Part      Tag    Flag     Cylinders         Size            Blocks
  0       root    wm       0 -    46      128.33MB    (47/0/0)       262824
  1       swap    wu      47 -    93      128.33MB    (47/0/0)       262824
  2     backup    wu       0 - 65534      174.75GB    (65535/0/0) 366471720
  3 unassigned    wm       0                0         (0/0/0)             0
  4 unassigned    wm       0                0         (0/0/0)             0
  5 unassigned    wm       0                0         (0/0/0)             0
  6        usr    wm      94 - 65534      174.50GB    (65441/0/0) 365946072
  7 unassigned    wm       0                0         (0/0/0)             0

partition> q


FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit
format> label
Current Disk is unformatted.
format> format
Ready to format.  Formatting cannot be interrupted
and takes 10597 minutes (estimated). Continue? yes
Beginning format. The current time is Fri Jun 22 10:33:52 2007

Formatting...
done

Warning: Current geometry overshoots actual geometry of disk

Continue labelling disk? yes
Warning: error writing VTOC.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: error reading backup label.
Warning: no backup labels

Verifying media...
        pass 0 - pattern = 0xc6dec6de
   0/0/0  

Warning:Drive may be reserved or has been removed, aborting surface analysis.

Warning: Current geometry overshoots actual geometry of disk

Continue labelling disk? no
format> quit
#

# [color=Red]iostat -E[/color]
sd4      Soft Errors: 7 Hard Errors: 0 Transport Errors: 1
Vendor: 3S9800   Product:                  Revision: 1.04 Serial No:  
Size: 2099.94GB <2099937017856 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
sd36     Soft Errors: 7 Hard Errors: 0 Transport Errors: 1
Vendor: 3S9800   Product:                  Revision: 1.04 Serial No:  
Size: 1048.58GB <1048576000000 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
sd45     Soft Errors: 7 Hard Errors: 0 Transport Errors: 1
Vendor: 3S9800   Product:                  Revision: 1.04 Serial No:  
Size: 751.37GB <751367618560 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 7 Predictive Failure Analysis: 0
ssd0     Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE  Product: ST314670FSUN146G Revision: 055A Serial No: 061944DH9N
Size: 146.80GB <146800115712 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd1     Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE  Product: ST314670FSUN146G Revision: 055A Serial No: 061944DKMT
Size: 146.80GB <146800115712 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0

#[color=DarkGreen] cfgadm -al[/color]
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    unconfigured unknown
c2                             scsi-bus     connected    configured   unknown
[color=DarkGreen]c2::dsk/c2t1d0                 disk         connected    configured   unknown[/color]
[color=DarkGreen]c2::dsk/c2t1d1                 disk         connected    configured   unknown[/color]
[color=DarkGreen]c2::dsk/c2t1d2                 disk         connected    configured   unknown[/color]

[color=Red]demsg about lun.[/color]
Jun 22 10:58:40 sun490 genunix: [ID 936769 kern.info] se0 is /pci@9,700000/ebus@1/serial@1,400000
Jun 22 10:58:41 sun490 scsi: [ID 193665 kern.info] sd4 at mpt0: target 1 lun 0
Jun 22 10:58:41 sun490 genunix: [ID 936769 kern.info] sd4 is /pci@8,600000/scsi@1/sd@1,0
Jun 22 10:58:42 sun490 scsi: [ID 193665 kern.info] sd36 at mpt0: target 1 lun 1
Jun 22 10:58:42 sun490 genunix: [ID 936769 kern.info] sd36 is /pci@8,600000/scsi@1/sd@1,1
Jun 22 10:58:42 sun490 scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1/sd@1,1 (sd36):
Jun 22 10:58:42 sun490  Corrupt label; wrong magic number
Jun 22 10:58:42 sun490 scsi: [ID 193665 kern.info] sd45 at mpt0: target 1 lun 2
Jun 22 10:58:42 sun490 genunix: [ID 936769 kern.info] sd45 is /pci@8,600000/scsi@1/sd@1,2
Jun 22 10:58:42 sun490 scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1/sd@1,2 (sd45):
Jun 22 10:58:42 sun490  Corrupt label; wrong magic number
Jun 22 11:00:27 sun490 scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1/sd@1,1 (sd36):
Jun 22 11:00:27 sun490  Corrupt label; wrong magic number
Jun 22 11:00:30 sun490 scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1/sd@1,2 (sd45):
Jun 22 11:00:30 sun490  Corrupt label; wrong magic number
Jun 22 11:08:52 sun490 scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/scsi@1/sd@1,2 (sd45):

[[i] 本帖最后由 luweinet 于 2007-6-22 11:37 编辑 [/i]]

这次连raid都弄到1t以下了还是不行，不搞了...:L

就是label的问题，我前段时间遇到过

使用format -e disk 然后label label

今天又拉过来一个9800。据说是适合solaris使用的，俺划个盘NRAID试了一下，
可以识别盘的驱动了，出现了楼上的情况，比我以前的情况强多了，这帮人发货的时候怎么不看，就为了多卖几块钱~~~？！~！！！！:angry
等待明天raid做完的结果...

都能认出lun信息，还能显示3s9800。嘿嘿，format后label
partion
newfs -T /dev/rdsk/....

回来问做存储开发的学弟，给我答复说存储的os会要求挂载的os匹配的情况...