继续搞PLM

搞好了，不会报错了，不过不知道为什么，实例起不来。

为什么会出现上面的问题，原因是这个

ec_per_vp_max

那个delta有关系吗？

唔知，但系就系起唔到实例。
宜家的 policy 系甘的。

globals:
        hmc_host_name = 10.140.15.227
        hmc_user_name = hscroot
        hmc_cec_name = TestVio


Gzwisq_gp:
        type = group
        cpu_type = shared
        cpu_maximum = 2
        mem_maximum = 0
        cpu_free_unused = yes

gzwisq1:
        type = partition
        group = Gzwisq_gp
        cpu_shares = 128
        cpu_intervals = 2
        cpu_load_high = 0.8
        cpu_load_low = 0.3

gzwisq2:
        type = partition
        group = Gzwisq_gp
        cpu_shares = 128
        cpu_intervals = 2
        cpu_load_high = 0.8
        cpu_load_low = 0.3

但当初设置ec的目的是。。。。

如果delta数目比下面的max小，可能可以过。

0.8

PLM就不用研究了，这个产品没什么用，IBM在Power6里也没有PLM了

看得比较辛苦,留个影子:D

鸡哥的连载写得真不错，让人有身临其境的感觉，很涨经验！！！！多谢多谢！！！

[quote]原帖由 [i]sd127[/i] 于 2007-11-21 20:50 发表 [url=http://www.loveunix.net/discuz/redirect.php?goto=findpost&pid=738346&ptid=73987][img]http://www.loveunix.net/discuz/images/common/back.gif[/img][/url]
PLM就不用研究了，这个产品没什么用，IBM在Power6里也没有PLM了 [/quote]

幸好我还没来得急看PLM

学学！

好好学习了,明显感觉跟不上形式了.向各位学习

:funk: :funk: 啥时候贴的  我怎么刚看到

:mad 你老婆到底给你吃了些啥？;P

虚拟化大会上的那VIO的PPT做得相当好.可惜没要到.:'(

我有个flash版的。。。。

Step-by-step virtualization configuration on an IBM eServer p5 server, part 1: configure VIO Server


Abstract  


The IBM® Virtual I/O Server (VIO Server), announced in July 2004, facilitates the sharing of physical resources between partitions on the IBM eServer™ p5 family of servers. The innovative VIO Server technology is driven by the IBM POWER5™ Virtualization Engine™. This paper offers a step-by-step (screen-by-screen) explanation of the process for installing a VIO Server on an eServer p5 model 9117-570. This paper serves as a guide for installing a VIO Server on all models of the eServer p5 family of servers.

NOTE: A step-by-step illustration of the process for configuring a client partition is explained in Part 2 of this set of three white papers. The third paper in this series demonstrates how to configure the Virtual devices.

Introduction

Virtual I/O Server and Partition Load Manager are part of the Advanced POWER™ Virtualization Engine hardware feature. Together with Partition Load Manager, the VIO Server provides:

Micro-Partitioning™ support for up to 10 logical partitions to share one processor
Virtual SCSI (VSCSI) disks that allow partitions to share physical storage adapters and devices
Automated CPU and memory reconfiguration
Real-time partition configuration and load statistics
Support for dedicated and shared processor logical partitioning (LPAR) groups
Support for manual provisioning of resources
Virtual networking
The VIO Server is a single function appliance that resides in a partition to provide Virtual SCSI target and shared Ethernet adapter Virtual I/O function to client partitions. This partition is not intended to run applications or for general user logins. The VIO Server partition is created using the Hardware Management Console (HMC). The VIO Server installation media ships with eServer p5 servers and is installed via CD. It supports the following operating environments as client partitions: IBM AIX 5L™ Version 5.3, SUSE Linux™ Enterprise Server 9 for POWER, and Red Hat Enterprise Linux AS for POWER, Version 3, as VIO clients.

[[i] 本帖最后由 小猪 于 2007-12-4 07:09 编辑 [/i]]

Step-by-step Virtualization configuration on an IBM eServer p5 server, part 3: configure virtual devices


Abstract  


This paper, the third in a three-part series, offers a step-by-step (screen-by-screen) explanation of the process for Virtual I/O devices on an IBM® eServer™ p5 model 9117-570. These steps serve as a broader guide for installing Virtual I/O devices on all current models of the IBM eServer pSeries® family of servers. The Virtual devices created in this example will be shared by client partitions via the IBM Virtual I/O Server (VIO Server), which is driven by the IBM POWER5™ Virtualization Engine™.

NOTE: A step-by-step illustration of the process for configuring a VIO Server is explained in part one of this set of three white papers. The second paper in this series demonstrated how to configure the client partitions.

Introduction

The reader is about to observe the process for configuring Virtual I/O devices on an eServer p5 model 9117-570. Each of these virtual devices will be utilized by client partitions through the administrative and management functionality built into the VIO Server. Before beginning, you must have already installed the VIO Server on the same system that will host the client servers. Second, you must have already created the client partitions that will use the Virtual devices.

The Virtual devices will support the needs of the client partitions with the following services and functions:

Micro-Partitioning™ support for up to 10 logical partitions to share one processor
Virtual SCSI (VSCSI) disks that allow partitions to share physical storage adapters and devices
Automated CPU and memory reconfiguration
Real-time partition configuration and load statistics
Support for dedicated and shared processor logical partitioning (LPAR) groups
Support for manual provisioning of resources
Virtual networking
The virtual devices can be accessed from any of the following operating systems (installed on a client partition):

IBM AIX 5L™ Version 5.3
SUSE Linux™ Enterprise Server 9 for POWER™
Red Hat Enterprise Linux AS for POWER, Version 3

[quote]原帖由 [i]老农[/i] 于 2007-12-4 05:47 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=742003&ptid=73987][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
我有个flash版的。。。。 [/quote]
:$ 偶想要.;P

Step-by-step virtualization configuration on an IBM eServer p5 server, part 1: configure VIO Server

19页.4M多.;P 传不上来.

学习了。谢谢。

多谢农哥．:$

跟随学习

楼上高手太客气了。

[quote]原帖由 [i]小猪[/i] 于 2007-12-4 22:49 发表 [url=http://www.loveunix.com/redirect.php?goto=findpost&pid=742350&ptid=73987][img]http://www.loveunix.com/images/common/back.gif[/img][/url]
多谢农哥．:$ [/quote]
:L 我有...没找到机器试