2007-10-30 21:43
小猪
mkvg: Unable to open physical volume [已解决]
环境：
P650 8C16G
DS4300 ＋ EXP710 ＋EXP810
DS4300控制器微码9.23
B16 X 2
新扩的EXP810划的LUN (HDISK10 HDISK11)加不进卷组。
DISPLAY MICROCODE LEVEL 802811
IBM,7038-6M2
Platform Firmware level is 3K050202
System Firmware level is RG050131_d79e01_regatta
# prtconf
System Model: IBM,7038-6M2
Machine Serial Number: 10E936C
Processor Type: PowerPC_POWER4
Number Of Processors: 8
Processor Clock Speed: 1452 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 1 NULL
Memory Size: 16384 MB
Good Memory Size: 16384 MB
Firmware Version: IBM,RG050131_d79e01_r
Console Login: enable
Auto Restart: false
Full Core: false
Paging Space Information
Total Paging Space: 20480MB
Percent Used: 20%
Volume Groups Information
==============================================================================
rootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk0 active 546 239 109..00..00..21..109
hdisk1 active 546 223 73..00..00..41..109
==============================================================================
oravg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk2 active 2179 600 04..00..82..78..436
==============================================================================
smsvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk3 active 3199 223 00..00..00..00..223
hdisk4 active 2799 199 48..00..00..00..151
hdisk7 active 2649 209 10..00..00..00..199
==============================================================================
idxvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk5 active 2718 414 32..00..00..00..382
hdisk6 active 2799 367 48..00..00..00..319
hdisk8 active 3199 383 00..00..00..00..383
==============================================================================
filevg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk9 active 3339 490 28..00..00..00..462
==============================================================================
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sys0 00-00 System Object
+ sysplanar0 00-00 System Planar
+ mem0 00-00 Memory
+ proc0 00-00 Processor
+ L2cache0 00-00 L2 Cache
+ proc1 00-01 Processor
+ proc2 00-02 Processor
+ proc3 00-03 Processor
+ proc4 00-04 Processor
+ proc5 00-05 Processor
+ proc6 00-06 Processor
+ proc7 00-07 Processor
* pci0 00-400000000110 PCI Bus
* isa0 1G-18 ISA Bus
+ fda0 01-D1 Standard I/O Diskette Adapter
+ fd0 01-D1-00-00 Diskette Drive
* siokma0 01-K1 Keyboard/Mouse Adapter
+ sioka0 01-K1-00 Keyboard Adapter
+ sioma0 01-K1-01 Mouse Adapter
+ sa0 01-S1 Standard I/O Serial Port
+ tty1 01-S1-00-00 Asynchronous Terminal
+ sa1 01-S2 Standard I/O Serial Port
+ tty0 01-S2-00-00 Asynchronous Terminal
+ sa2 01-S3 Standard I/O Serial Port
+ sa3 01-S4 Standard I/O Serial Port
* pci1 00-400000000111 PCI Bus
* pci3 1Y-10 PCI Bus
+ scsi0 1Z-08 Wide/Ultra-3 SCSI I/O Controller
+ rmt0 1Z-08-00-0,0 Differential SCSI 4mm Tape Drive
(20480 MB)
+ cd0 1Z-08-00-1,0 16 Bit LVD SCSI DVD-ROM Drive (4700
MB)
+ hdisk0 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive (73400
MB)
+ hdisk1 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive (73400
MB)
* ses0 1Z-08-00-14,0 SCSI Enclosure Services Device
* ses1 1Z-08-00-15,0 SCSI Enclosure Services Device
+ scsi1 1Z-09 Wide/Ultra-3 SCSI I/O Controller
* pci4 1Y-12 PCI Bus
+ ent0 1c-08 10/100 Mbps Ethernet PCI Adapter II
(1410ff01)
* pci5 1Y-13 PCI Bus
* pci6 1Y-14 PCI Bus
+ ent1 1j-08 10/100 Mbps Ethernet PCI Adapter II
(1410ff01)
* pci7 1Y-16 PCI Bus
+ fcs0 1n-08 FC Adapter
* fscsi0 1n-08-01 FC SCSI I/O Controller Protocol
Device
* dac0 1n-08-01 1722-600 (600) Disk Array Controller
* pci2 00-400000000112 PCI Bus
* pci8 10-10 PCI Bus
+ fcs1 11-08 FC Adapter
* fscsi1 11-08-01 FC SCSI I/O Controller Protocol
Device
* dac1 11-08-01 1722-600 (600) Disk Array Controller
* pci9 10-12 PCI Bus
* pci10 10-14 PCI Bus
* pci11 1A-08 PCI Bus
+ lai0 1B-00 GXT135P Graphics Adapter
* pci12 10-16 PCI Bus
* ent2 1D-08 2-Port 10/100/1000 Base-TX PCI-X
Adapter (14108902)
* ent3 1D-09 2-Port 10/100/1000 Base-TX PCI-X
Adapter (14108902)
+ hdisk2 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk3 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk4 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk5 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk6 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk7 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk8 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk9 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk10 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk11 1n-08-01 1722-600 (600) Disk Array Device
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-1254 mkvg: Changing the PVID in the ODM.
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-304 mkvg: Unable to find device id in the Device
Configuration Database.
0516-324 mkvg: Unable to find PV identifier for physical volume.
The Device Configuration Database is inconsistent for physical
volumes.
# lscfg -vl fcs0
DEVICE LOCATION DESCRIPTION
fcs0 1n-08 FC Adapter
Part Number.................80P4381
EC Level....................A
Serial Number...............1F5080B082
Manufacturer................001F
FRU Number.................. 80P4382
Device Specific.(ZM)........3
Network Address.............10000000C944E0C5
ROS Level and ID............02E01932
Device Specific.(Z0)........2003806D
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........03000909
Device Specific.(Z4)........FF601315
Device Specific.(Z5)........02E01932
Device Specific.(Z6)........06631932
Device Specific.(Z7)........07631932
Device Specific.(Z8)........20000000C944E0C5
Device Specific.(Z9)........HS1.90X2
Device Specific.(ZA)........H1D1.90X2
Device Specific.(ZB)........H2D1.90X2
Device Specific.(YL)........U0.1-P2-I6/Q1
# lscfg -vl fcs1
DEVICE LOCATION DESCRIPTION
fcs1 11-08 FC Adapter
Part Number.................80P4381
EC Level....................A
Serial Number...............1F5080B3C4
Manufacturer................001F
FRU Number.................. 80P4382
Device Specific.(ZM)........3
Network Address.............10000000C944DAE5
ROS Level and ID............02E01932
Device Specific.(Z0)........2003806D
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........03000909
Device Specific.(Z4)........FF601315
Device Specific.(Z5)........02E01932
Device Specific.(Z6)........06631932
Device Specific.(Z7)........07631932
Device Specific.(Z8)........20000000C944DAE5
Device Specific.(Z9)........HS1.90X2
Device Specific.(ZA)........H1D1.90X2
Device Specific.(ZB)........H2D1.90X2
Device Specific.(YL)........U0.1-P2-I1/Q1
# lscfg -vl dac*
DEVICE LOCATION DESCRIPTION
dac0 1n-08-01 1722-600 (600) Disk Array Controller
Manufacturer................IBM
Machine Type and Model......1722-600
Part Number.................12844-00
ROS Level and ID............0914
Serial Number...............1T53888221
Device Specific.(Z1)........2D363030
Device Specific.(Z2)........00000000
Device Specific.(Z3)........00000000
dac1 11-08-01 1722-600 (600) Disk Array Controller
Manufacturer................IBM
Machine Type and Model......1722-600
Part Number.................12844-00
ROS Level and ID............0914
Serial Number...............1T53886019
Device Specific.(Z1)........2D363030
Device Specific.(Z2)........00000000
Device Specific.(Z3)........00000000
DISPLAY MICROCODE LEVEL 802111
fcs0 FC Adapter
The current microcode level for fcs0 is 190302.
Use Enter to continue.
DISPLAY MICROCODE LEVEL 802111
fcs1 FC Adapter
The current microcode level for fcs1 is 190302.
Use Enter to continue.
# lscfg -vp | grep -p Platform
Platform Firmware:
ROM Level.(alterable).......3K050202
Version.....................RS6K
System Info Specific.(YL)...U0.1-P2/Y1
Physical Location: U0.1-P2/Y1
# chdev -l hdisk10 -a pv=yes
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device
DISK MAINTENANCE SERVICE AID 802661
Display/Alter Sector
Move cursor to selection, then press Enter.
16 Bit LVD SCSI Disk Drive at location 1Z-08-00-8,0
16 Bit LVD SCSI Disk Drive at location 1Z-08-00-9,0
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
# lspv
hdisk0 000e936cfa48f4fe rootvg
hdisk1 000e936c9b252078 rootvg
hdisk2 000e936c94012b69 oravg
hdisk3 000e936c9408e589 smsvg
hdisk4 000e936c9408fe8e smsvg
hdisk5 000e936c94092eb3 idxvg
hdisk6 000e936c9409468a idxvg
hdisk7 000e936c940a0628 smsvg
hdisk8 000e936c940a0fbe idxvg
hdisk9 000e936c9409e19d filevg
hdisk10 none None
hdisk11 none None
#
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0003000000000
000
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0004000000000
000
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0005000000000
000
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0006000000000
000
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0007000000000
000
hdisk10 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x000800000000
0000
hdisk11 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x000900000000
0000
dac1 Available 11-08-01 1722-600 (600) Disk Array Controller ACTIVE
hdisk9 Raid 5 1n-08-01 427407 MB Status OPTIMAL LUN=0x7000000000000
hdisk9 20 Channel 2 ID 0 Location 2,0 Optimal
hdisk9 21 Channel 2 ID 1 Location 2,1 Optimal
hdisk9 22 Channel 2 ID 2 Location 2,2 Optimal
hdisk9 23 Channel 2 ID 3 Location 2,3 Optimal
hdisk9 24 Channel 2 ID 4 Location 2,4 Optimal
hdisk9 25 Channel 2 ID 5 Location 2,5 Optimal
hdisk9 26 Channel 2 ID 6 Location 2,6 Optimal
hdisk10 Raid 5 1n-08-01 664964 MB Status OPTIMAL LUN=0x8000000000000
hdisk10 50 Channel 5 ID 0 Location 5,0 Optimal
hdisk10 51 Channel 5 ID 1 Location 5,1 Optimal
hdisk10 52 Channel 5 ID 2 Location 5,2 Optimal
hdisk10 54 Channel 5 ID 4 Location 5,4 Optimal
hdisk10 45 Channel 4 ID 5 Location 4,5 Optimal
hdisk10 46 Channel 4 ID 6 Location 4,6 Optimal
hdisk10 47 Channel 4 ID 7 Location 4,7 Optimal
hdisk11 Raid 5 1n-08-01 950554 MB Status OPTIMAL LUN=0x9000000000000
hdisk11 60 Channel 6 ID 0 Location 6,0 Optimal
hdisk11 61 Channel 6 ID 1 Location 6,1 Optimal
hdisk11 62 Channel 6 ID 2 Location 6,2 Optimal
hdisk11 63 Channel 6 ID 3 Location 6,3 Optimal
hdisk11 64 Channel 6 ID 4 Location 6,4 Optimal
hdisk11 55 Channel 5 ID 5 Location 5,5 Optimal
hdisk11 56 Channel 5 ID 6 Location 5,6 Optimal
hdisk11 57 Channel 5 ID 7 Location 5,7 Optimal
[[i] 本帖最后由 小猪 于 2008-1-9 15:33 编辑 [/i]]
环境：
P650 8C16G
DS4300 ＋ EXP710 ＋EXP810
DS4300控制器微码9.23
B16 X 2
新扩的EXP810划的LUN (HDISK10 HDISK11)加不进卷组。
DISPLAY MICROCODE LEVEL 802811
IBM,7038-6M2
Platform Firmware level is 3K050202
System Firmware level is RG050131_d79e01_regatta
# prtconf
System Model: IBM,7038-6M2
Machine Serial Number: 10E936C
Processor Type: PowerPC_POWER4
Number Of Processors: 8
Processor Clock Speed: 1452 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 1 NULL
Memory Size: 16384 MB
Good Memory Size: 16384 MB
Firmware Version: IBM,RG050131_d79e01_r
Console Login: enable
Auto Restart: false
Full Core: false
Paging Space Information
Total Paging Space: 20480MB
Percent Used: 20%
Volume Groups Information
==============================================================================
rootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk0 active 546 239 109..00..00..21..109
hdisk1 active 546 223 73..00..00..41..109
==============================================================================
oravg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk2 active 2179 600 04..00..82..78..436
==============================================================================
smsvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk3 active 3199 223 00..00..00..00..223
hdisk4 active 2799 199 48..00..00..00..151
hdisk7 active 2649 209 10..00..00..00..199
==============================================================================
idxvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk5 active 2718 414 32..00..00..00..382
hdisk6 active 2799 367 48..00..00..00..319
hdisk8 active 3199 383 00..00..00..00..383
==============================================================================
filevg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk9 active 3339 490 28..00..00..00..462
==============================================================================
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sys0 00-00 System Object
+ sysplanar0 00-00 System Planar
+ mem0 00-00 Memory
+ proc0 00-00 Processor
+ L2cache0 00-00 L2 Cache
+ proc1 00-01 Processor
+ proc2 00-02 Processor
+ proc3 00-03 Processor
+ proc4 00-04 Processor
+ proc5 00-05 Processor
+ proc6 00-06 Processor
+ proc7 00-07 Processor
* pci0 00-400000000110 PCI Bus
* isa0 1G-18 ISA Bus
+ fda0 01-D1 Standard I/O Diskette Adapter
+ fd0 01-D1-00-00 Diskette Drive
* siokma0 01-K1 Keyboard/Mouse Adapter
+ sioka0 01-K1-00 Keyboard Adapter
+ sioma0 01-K1-01 Mouse Adapter
+ sa0 01-S1 Standard I/O Serial Port
+ tty1 01-S1-00-00 Asynchronous Terminal
+ sa1 01-S2 Standard I/O Serial Port
+ tty0 01-S2-00-00 Asynchronous Terminal
+ sa2 01-S3 Standard I/O Serial Port
+ sa3 01-S4 Standard I/O Serial Port
* pci1 00-400000000111 PCI Bus
* pci3 1Y-10 PCI Bus
+ scsi0 1Z-08 Wide/Ultra-3 SCSI I/O Controller
+ rmt0 1Z-08-00-0,0 Differential SCSI 4mm Tape Drive
(20480 MB)
+ cd0 1Z-08-00-1,0 16 Bit LVD SCSI DVD-ROM Drive (4700
MB)
+ hdisk0 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive (73400
MB)
+ hdisk1 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive (73400
MB)
* ses0 1Z-08-00-14,0 SCSI Enclosure Services Device
* ses1 1Z-08-00-15,0 SCSI Enclosure Services Device
+ scsi1 1Z-09 Wide/Ultra-3 SCSI I/O Controller
* pci4 1Y-12 PCI Bus
+ ent0 1c-08 10/100 Mbps Ethernet PCI Adapter II
(1410ff01)
* pci5 1Y-13 PCI Bus
* pci6 1Y-14 PCI Bus
+ ent1 1j-08 10/100 Mbps Ethernet PCI Adapter II
(1410ff01)
* pci7 1Y-16 PCI Bus
+ fcs0 1n-08 FC Adapter
* fscsi0 1n-08-01 FC SCSI I/O Controller Protocol
Device
* dac0 1n-08-01 1722-600 (600) Disk Array Controller
* pci2 00-400000000112 PCI Bus
* pci8 10-10 PCI Bus
+ fcs1 11-08 FC Adapter
* fscsi1 11-08-01 FC SCSI I/O Controller Protocol
Device
* dac1 11-08-01 1722-600 (600) Disk Array Controller
* pci9 10-12 PCI Bus
* pci10 10-14 PCI Bus
* pci11 1A-08 PCI Bus
+ lai0 1B-00 GXT135P Graphics Adapter
* pci12 10-16 PCI Bus
* ent2 1D-08 2-Port 10/100/1000 Base-TX PCI-X
Adapter (14108902)
* ent3 1D-09 2-Port 10/100/1000 Base-TX PCI-X
Adapter (14108902)
+ hdisk2 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk3 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk4 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk5 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk6 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk7 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk8 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk9 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk10 1n-08-01 1722-600 (600) Disk Array Device
+ hdisk11 1n-08-01 1722-600 (600) Disk Array Device
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-1254 mkvg: Changing the PVID in the ODM.
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-304 mkvg: Unable to find device id in the Device
Configuration Database.
0516-324 mkvg: Unable to find PV identifier for physical volume.
The Device Configuration Database is inconsistent for physical
volumes.
# lscfg -vl fcs0
DEVICE LOCATION DESCRIPTION
fcs0 1n-08 FC Adapter
Part Number.................80P4381
EC Level....................A
Serial Number...............1F5080B082
Manufacturer................001F
FRU Number.................. 80P4382
Device Specific.(ZM)........3
Network Address.............10000000C944E0C5
ROS Level and ID............02E01932
Device Specific.(Z0)........2003806D
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........03000909
Device Specific.(Z4)........FF601315
Device Specific.(Z5)........02E01932
Device Specific.(Z6)........06631932
Device Specific.(Z7)........07631932
Device Specific.(Z8)........20000000C944E0C5
Device Specific.(Z9)........HS1.90X2
Device Specific.(ZA)........H1D1.90X2
Device Specific.(ZB)........H2D1.90X2
Device Specific.(YL)........U0.1-P2-I6/Q1
# lscfg -vl fcs1
DEVICE LOCATION DESCRIPTION
fcs1 11-08 FC Adapter
Part Number.................80P4381
EC Level....................A
Serial Number...............1F5080B3C4
Manufacturer................001F
FRU Number.................. 80P4382
Device Specific.(ZM)........3
Network Address.............10000000C944DAE5
ROS Level and ID............02E01932
Device Specific.(Z0)........2003806D
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........03000909
Device Specific.(Z4)........FF601315
Device Specific.(Z5)........02E01932
Device Specific.(Z6)........06631932
Device Specific.(Z7)........07631932
Device Specific.(Z8)........20000000C944DAE5
Device Specific.(Z9)........HS1.90X2
Device Specific.(ZA)........H1D1.90X2
Device Specific.(ZB)........H2D1.90X2
Device Specific.(YL)........U0.1-P2-I1/Q1
# lscfg -vl dac*
DEVICE LOCATION DESCRIPTION
dac0 1n-08-01 1722-600 (600) Disk Array Controller
Manufacturer................IBM
Machine Type and Model......1722-600
Part Number.................12844-00
ROS Level and ID............0914
Serial Number...............1T53888221
Device Specific.(Z1)........2D363030
Device Specific.(Z2)........00000000
Device Specific.(Z3)........00000000
dac1 11-08-01 1722-600 (600) Disk Array Controller
Manufacturer................IBM
Machine Type and Model......1722-600
Part Number.................12844-00
ROS Level and ID............0914
Serial Number...............1T53886019
Device Specific.(Z1)........2D363030
Device Specific.(Z2)........00000000
Device Specific.(Z3)........00000000
DISPLAY MICROCODE LEVEL 802111
fcs0 FC Adapter
The current microcode level for fcs0 is 190302.
Use Enter to continue.
DISPLAY MICROCODE LEVEL 802111
fcs1 FC Adapter
The current microcode level for fcs1 is 190302.
Use Enter to continue.
# lscfg -vp | grep -p Platform
Platform Firmware:
ROM Level.(alterable).......3K050202
Version.....................RS6K
System Info Specific.(YL)...U0.1-P2/Y1
Physical Location: U0.1-P2/Y1
# chdev -l hdisk10 -a pv=yes
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device
DISK MAINTENANCE SERVICE AID 802661
Display/Alter Sector
Move cursor to selection, then press Enter.
16 Bit LVD SCSI Disk Drive at location 1Z-08-00-8,0
16 Bit LVD SCSI Disk Drive at location 1Z-08-00-9,0
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
1722-600 (600) Disk Array Device at location 1n-08-01
# lspv
hdisk0 000e936cfa48f4fe rootvg
hdisk1 000e936c9b252078 rootvg
hdisk2 000e936c94012b69 oravg
hdisk3 000e936c9408e589 smsvg
hdisk4 000e936c9408fe8e smsvg
hdisk5 000e936c94092eb3 idxvg
hdisk6 000e936c9409468a idxvg
hdisk7 000e936c940a0628 smsvg
hdisk8 000e936c940a0fbe idxvg
hdisk9 000e936c9409e19d filevg
hdisk10 none None
hdisk11 none None
#
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0003000000000
000
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0004000000000
000
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0005000000000
000
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0006000000000
000
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x0007000000000
000
hdisk10 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x000800000000
0000
hdisk11 Available 1n-08-01 1722-600 (600) Disk Array Device LUN=0x000900000000
0000
dac1 Available 11-08-01 1722-600 (600) Disk Array Controller ACTIVE
hdisk9 Raid 5 1n-08-01 427407 MB Status OPTIMAL LUN=0x7000000000000
hdisk9 20 Channel 2 ID 0 Location 2,0 Optimal
hdisk9 21 Channel 2 ID 1 Location 2,1 Optimal
hdisk9 22 Channel 2 ID 2 Location 2,2 Optimal
hdisk9 23 Channel 2 ID 3 Location 2,3 Optimal
hdisk9 24 Channel 2 ID 4 Location 2,4 Optimal
hdisk9 25 Channel 2 ID 5 Location 2,5 Optimal
hdisk9 26 Channel 2 ID 6 Location 2,6 Optimal
hdisk10 Raid 5 1n-08-01 664964 MB Status OPTIMAL LUN=0x8000000000000
hdisk10 50 Channel 5 ID 0 Location 5,0 Optimal
hdisk10 51 Channel 5 ID 1 Location 5,1 Optimal
hdisk10 52 Channel 5 ID 2 Location 5,2 Optimal
hdisk10 54 Channel 5 ID 4 Location 5,4 Optimal
hdisk10 45 Channel 4 ID 5 Location 4,5 Optimal
hdisk10 46 Channel 4 ID 6 Location 4,6 Optimal
hdisk10 47 Channel 4 ID 7 Location 4,7 Optimal
hdisk11 Raid 5 1n-08-01 950554 MB Status OPTIMAL LUN=0x9000000000000
hdisk11 60 Channel 6 ID 0 Location 6,0 Optimal
hdisk11 61 Channel 6 ID 1 Location 6,1 Optimal
hdisk11 62 Channel 6 ID 2 Location 6,2 Optimal
hdisk11 63 Channel 6 ID 3 Location 6,3 Optimal
hdisk11 64 Channel 6 ID 4 Location 6,4 Optimal
hdisk11 55 Channel 5 ID 5 Location 5,5 Optimal
hdisk11 56 Channel 5 ID 6 Location 5,6 Optimal
hdisk11 57 Channel 5 ID 7 Location 5,7 Optimal
[[i] 本帖最后由 小猪 于 2008-1-9 15:33 编辑 [/i]]
2007-10-30 21:59
小猪
Before command completion, additional instructions may appear below.
hdisk0 Available 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk3 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk4 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk10 Defined 1n-08-01 1722-600 (600) Disk Array Device
hdisk11 Defined 1n-08-01 1722-600 (600) Disk Array Device
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-1254 mkvg: Changing the PVID in the ODM.
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-304 mkvg: Unable to find device id in the Device
Configuration Database.
0516-324 mkvg: Unable to find PV identifier for physical volume.
The Device Configuration Database is inconsistent for physical
volumes.
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
hdisk0 Available 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk3 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk4 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk10 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk11 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk0 Available 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk3 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk4 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk10 Defined 1n-08-01 1722-600 (600) Disk Array Device
hdisk11 Defined 1n-08-01 1722-600 (600) Disk Array Device
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-1254 mkvg: Changing the PVID in the ODM.
Method error (/etc/methods/chgdisk):
0514-047 Cannot access a device.
0516-024 mkvg: Unable to open physical volume.
Either PV was not configured or could not be opened. Run
diagnostics.
0516-862 mkvg: Unable to create volume group.
0516-304 mkvg: Unable to find device id in the Device
Configuration Database.
0516-324 mkvg: Unable to find PV identifier for physical volume.
The Device Configuration Database is inconsistent for physical
volumes.
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
hdisk0 Available 1Z-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1Z-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk3 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk4 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk5 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk6 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk7 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk8 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk9 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk10 Available 1n-08-01 1722-600 (600) Disk Array Device
hdisk11 Available 1n-08-01 1722-600 (600) Disk Array Device
2007-10-30 22:14
小猪
OS为5100－04;P
2007-10-31 00:00
炸鸡
51是否要加某个IY才能用到盘。
2007-10-31 07:12
乐之陶
hba卡微码:o
2007-10-31 09:17
小猪
[quote]原帖由 [i]炸鸡[/i] 于 2007-10-31 00:00 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=732727&ptid=78072][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
51是否要加某个IY才能用到盘。 [/quote]
;P 升级HBA微码的说明上也是这样子说的．;P
51是否要加某个IY才能用到盘。 [/quote]
;P 升级HBA微码的说明上也是这样子说的．;P
2007-10-31 14:36
小猪
4.0 Cautions and Important Notes
NOTICE FOR CUSTOMERS INSTALLING 1.92a1 FIRMWARE
Some customers running with a 64-bit kernel and AIX software may experience a condition where the hdisks don't appear or the system can not do a SAN boot following installation of this firmware level. This is due to an AIX software problem in 5.2 and 5.3 that is currently being fixed. If you should experience this problem, reinstall the 1.91x4 firmware which can be found on this site with the title z-N-1 level: 2 gigabit Fibre Channel PCI-X Adapter - Code Level 1.91X4.
The 52 APAR fix IZ05479 is scheduled to be available around the first of November.
The 53 APAR fix IZ05535 is scheduled to be available around the first of December.
You can obtain the fixes from the IBM Fix Central website located at [url]http://www-912.ibm.com/eserver/support/fixes/fcgui.jsp.[/url]
Recommended AIX APARs for this firmware
The recommended AIX device driver APARs for this firmware are:
· AIX 5.1 APAR IY69858
· AIX 5.2 APAR IY69751
· AIX 5.3 APAR IY69796
Concurrent Download
The microcode installation occurs while the adapter and any attached drives are available for use. It is recommended that this installation be scheduled during non-peak production periods
NOTE: An APAR is required to successfully download firmware concurrently.
o AIX 5.1 APAR IY69858
o AIX 5.2 APAR IY69751
o AIX 5.3 APAR IY69796
If the APAR for your AIX level is not installed, a reboot is required following firmware download.
Firmware download AIX APARs required for firmware download .
Prior to downloading firmware to the FC 6239, the following APAR must be installed :
AIX 5.1 = APAR IY35308,
AIX 5.2 = APAR IY35747
Note: Failure to have the APAR installed will damage the adapter.
To determine if the APAR is installed, enter the following command:
lslpp -L | grep df1000f7.com
For AIX 5.1, the file set must be at 5.1.0.50 or higher
For AIX 5.2, the file set must be at 5.2.0.10 or higher
NOTICE FOR CUSTOMERS INSTALLING 1.92a1 FIRMWARE
Some customers running with a 64-bit kernel and AIX software may experience a condition where the hdisks don't appear or the system can not do a SAN boot following installation of this firmware level. This is due to an AIX software problem in 5.2 and 5.3 that is currently being fixed. If you should experience this problem, reinstall the 1.91x4 firmware which can be found on this site with the title z-N-1 level: 2 gigabit Fibre Channel PCI-X Adapter - Code Level 1.91X4.
The 52 APAR fix IZ05479 is scheduled to be available around the first of November.
The 53 APAR fix IZ05535 is scheduled to be available around the first of December.
You can obtain the fixes from the IBM Fix Central website located at [url]http://www-912.ibm.com/eserver/support/fixes/fcgui.jsp.[/url]
Recommended AIX APARs for this firmware
The recommended AIX device driver APARs for this firmware are:
· AIX 5.1 APAR IY69858
· AIX 5.2 APAR IY69751
· AIX 5.3 APAR IY69796
Concurrent Download
The microcode installation occurs while the adapter and any attached drives are available for use. It is recommended that this installation be scheduled during non-peak production periods
NOTE: An APAR is required to successfully download firmware concurrently.
o AIX 5.1 APAR IY69858
o AIX 5.2 APAR IY69751
o AIX 5.3 APAR IY69796
If the APAR for your AIX level is not installed, a reboot is required following firmware download.
Firmware download AIX APARs required for firmware download .
Prior to downloading firmware to the FC 6239, the following APAR must be installed :
AIX 5.1 = APAR IY35308,
AIX 5.2 = APAR IY35747
Note: Failure to have the APAR installed will damage the adapter.
To determine if the APAR is installed, enter the following command:
lslpp -L | grep df1000f7.com
For AIX 5.1, the file set must be at 5.1.0.50 or higher
For AIX 5.2, the file set must be at 5.2.0.10 or higher
2007-10-31 15:16
小猪
Firmware Description and Revision History
This firmware update contains the following features and fixes:
Firmware Level
Changes
1.92a1
READ CAUTIONS AND IMPORTANT NOTES (SECTION 4.0) PRIOR TO INSTALLING THIS FIRMWARE LEVEL
Fix FC_DISK_ERR (command timeout ) command not processed due to a race condition clearing interrupts.
Fix transmit hang that results in out of resources condition.
1.91x4
Fix problem with IOCB left on ring.
1.81X3
Fix tape sequence recovery algorithm.
1.81X1
Fix problem with FCode (Can't see devices from SMS menu).
Fix problem with FCode (System crashes to default menu during SAN boot).
Fix firmware problem (data not sent to target on a write) cause by mismanagement of AIX data pointer list.
Add support for IP over FC.
Firmware 1.90x2 was pulled do to disk command time out errors.
This firmware update contains the following features and fixes:
Firmware Level
Changes
1.92a1
READ CAUTIONS AND IMPORTANT NOTES (SECTION 4.0) PRIOR TO INSTALLING THIS FIRMWARE LEVEL
Fix FC_DISK_ERR (command timeout ) command not processed due to a race condition clearing interrupts.
Fix transmit hang that results in out of resources condition.
1.91x4
Fix problem with IOCB left on ring.
1.81X3
Fix tape sequence recovery algorithm.
1.81X1
Fix problem with FCode (Can't see devices from SMS menu).
Fix problem with FCode (System crashes to default menu during SAN boot).
Fix firmware problem (data not sent to target on a write) cause by mismanagement of AIX data pointer list.
Add support for IP over FC.
Firmware 1.90x2 was pulled do to disk command time out errors.
2007-10-31 15:19
小猪
:'( 昨天称了一下体重.78KG.
2007-10-31 16:08
小猪
HBA卡FW升级了.故障依旧.;P
2007-10-31 16:10
小猪
由于应用的原因.不敢轻易打IY69858;P
之前做好了ROOTVG备份.:$
找时间打IY的PP.:D
之前做好了ROOTVG备份.:$
找时间打IY的PP.:D
2007-10-31 16:18
小猪
IY69858: BB_CREDIT_SAVE PDAT ATTRIBUTE NEEDED FOR FC ADAPTERS
A fix is available
Download fix packs
APAR status
Closed as program error.
Error description
May not be able to configure drives on microcode download
Local fix
Problem summary
May not be able to configure drives on microcode download
Problem conclusion
A new ODM PdAt attribute bb_credit_save is added, set to a
default value of "yes" to force maintaining the buffer to
buffer credits in the adapter driver to sync up the
transactions between adapter and the switch.
Temporary fix
Comments
APAR information
APAR number IY69858
Reported component name AIX 5L FOR POWE
Reported component ID 5765E6100
Reported release 510
Status CLOSED PER
PE NoPE
HIPER NoHIPER
Submitted date 2005-04-01
Closed date 2005-04-01
Last modified date 2005-04-21
APAR is sysrouted FROM one or more of the following:
IY69796
APAR is sysrouted TO one or more of the following:
U803480
Publications Referenced
Fix information
Fixed component name AIX 5L FOR POWE
Fixed component ID 5765E6100
Applicable component levels
R510 PSY U803480 UP05/04/21 I 1000
A fix is available
Download fix packs
APAR status
Closed as program error.
Error description
May not be able to configure drives on microcode download
Local fix
Problem summary
May not be able to configure drives on microcode download
Problem conclusion
A new ODM PdAt attribute bb_credit_save is added, set to a
default value of "yes" to force maintaining the buffer to
buffer credits in the adapter driver to sync up the
transactions between adapter and the switch.
Temporary fix
Comments
APAR information
APAR number IY69858
Reported component name AIX 5L FOR POWE
Reported component ID 5765E6100
Reported release 510
Status CLOSED PER
PE NoPE
HIPER NoHIPER
Submitted date 2005-04-01
Closed date 2005-04-01
Last modified date 2005-04-21
APAR is sysrouted FROM one or more of the following:
IY69796
APAR is sysrouted TO one or more of the following:
U803480
Publications Referenced
Fix information
Fixed component name AIX 5L FOR POWE
Fixed component ID 5765E6100
Applicable component levels
R510 PSY U803480 UP05/04/21 I 1000
2007-10-31 16:39
小猪
NOTE: AIX FCS driver recommended level
AIX 5.1 APAR IY69858 (U801792, devices.pci.df1000f7.com.5.1.0.64) ;P 咔嚓，就把这个打上去．;P
AIX 5.2 APAR IY69751 (U802288, devices.pci.df1000f7.com.5.2.0.75)
AIX 5.3 APAR IY69796 (U478110, devices.pci.df1000f7.com.5.3.0.30)
AIX 5.1 APAR IY69858 (U801792, devices.pci.df1000f7.com.5.1.0.64) ;P 咔嚓，就把这个打上去．;P
AIX 5.2 APAR IY69751 (U802288, devices.pci.df1000f7.com.5.2.0.75)
AIX 5.3 APAR IY69796 (U478110, devices.pci.df1000f7.com.5.3.0.30)
2007-10-31 17:07
小猪
bos.mp 5.1.0.63 # Fileset Update
bos.mp64 5.1.0.64 # Fileset Update
bos.rte.serv_aid 5.1.0.59 # Fileset Update
devices.pci.df1000f7.diag 5.1.0.58 # Fileset Update
;P 需要这几个包.找包中...
bos.mp64 5.1.0.64 # Fileset Update
bos.rte.serv_aid 5.1.0.59 # Fileset Update
devices.pci.df1000f7.diag 5.1.0.58 # Fileset Update
;P 需要这几个包.找包中...
2007-10-31 18:00
小猪
:'( 没找到IY69858这包.
2007-10-31 21:22
小猪
:'( 少N多包.;P
[[i] 本帖最后由 小猪 于 2007-10-31 21:24 编辑 [/i]]
[[i] 本帖最后由 小猪 于 2007-10-31 21:24 编辑 [/i]]
2007-10-31 21:24
老农
文档上有的都找不到？
2007-10-31 21:40
小猪
devices.pci.df1000f9.rte 5.1.0.37
devices.pci.df1000f7.com 5.1.0.64
devices.fcp.disk.rte 5.1.0.60
这三个包都下载好了.安装时候需要一些基本包.;P
然后又涉及到其它的包.;P
devices.pci.df1000f7.com 5.1.0.64
devices.fcp.disk.rte 5.1.0.60
这三个包都下载好了.安装时候需要一些基本包.;P
然后又涉及到其它的包.;P
2007-10-31 21:43
小猪
[quote]原帖由 [i]老农[/i] 于 2007-10-31 21:24 发表 [url=http://bbs.loveunix.net/redirect.php?goto=findpost&pid=732981&ptid=78072][img]http://bbs.loveunix.net/images/common/back.gif[/img][/url]
文档上有的都找不到？ [/quote]
文档上面的包有.安装文档上面的包的时候需要的一些基本包与一些低版本的包找不到.;P 没5.1的安装光碟.:$
文档上有的都找不到？ [/quote]
文档上面的包有.安装文档上面的包的时候需要的一些基本包与一些低版本的包找不到.;P 没5.1的安装光碟.:$
2007-10-31 21:48
小猪
[url]http://www-1.ibm.com/support/docview.wss?uid=ssg1S1002472#_pSeries[/url]
多谢农哥.:D
多谢农哥.:D
2007-11-1 09:12
小猪
与光纤通道设备相关的文件集介绍
Document #: 1811124B18001
Body:
与光纤通道设备相关的文件集介绍
环境:(产品,平台,机型,软件版本,等)
产品：AIX
机型：p-series
版本：AIX 5L
问题描述:
在AIX操作系统中有很多与光纤通道设备相关的文件集(fileset),用户有时候会感到很迷惑，不知道该安装哪些文件集，不该安装哪些文件集。这里，做一简单介绍：
解答:
在AIX操作系统中的这些文件集有一些是专用的，有一些是通用的，具体如下：
devices.fcp.disk.rte -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.common.IBM.fc.rte -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.pci.df1000f7.com -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.pci.df1000f7.rte -> 6227 光纤卡的驱动程序
devices.pci.df1000f7.diag -> 6227 光纤卡的 诊断程序
devices.pci.df1000f9.rte -> 6228 光纤卡的驱动程序
devices.pci.df1000f9.diag -> 6228 光纤卡的诊断程序
devices.pci.df1080f9.rte -> 6239 光纤卡的驱动程序
devices.pci.df1080f9.diag -> 6239 光纤卡的诊断程序
devices.fcp.disk.array.rte -> 连接IBM FAStT存储设备所需要
devices.fcp.disk.array.diag -> 连接IBM FAStT存储设备所需要
(以上文件集存放于AIX光盘中。)
ibm2105.rte -> 连接IBM 2105 ESS存储设备所需要
devices.sdd.xx.rte -> 连接IBM 2105 ESS存储设备，提供多通路支持(vpath)
(这两个文件集在单独购买的SDD软件光盘中。)
Document #: 1811124B18001
Body:
与光纤通道设备相关的文件集介绍
环境:(产品,平台,机型,软件版本,等)
产品：AIX
机型：p-series
版本：AIX 5L
问题描述:
在AIX操作系统中有很多与光纤通道设备相关的文件集(fileset),用户有时候会感到很迷惑，不知道该安装哪些文件集，不该安装哪些文件集。这里，做一简单介绍：
解答:
在AIX操作系统中的这些文件集有一些是专用的，有一些是通用的，具体如下：
devices.fcp.disk.rte -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.common.IBM.fc.rte -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.pci.df1000f7.com -> 任何通过光纤通道连接到AIX的光纤存储设备都需要
devices.pci.df1000f7.rte -> 6227 光纤卡的驱动程序
devices.pci.df1000f7.diag -> 6227 光纤卡的 诊断程序
devices.pci.df1000f9.rte -> 6228 光纤卡的驱动程序
devices.pci.df1000f9.diag -> 6228 光纤卡的诊断程序
devices.pci.df1080f9.rte -> 6239 光纤卡的驱动程序
devices.pci.df1080f9.diag -> 6239 光纤卡的诊断程序
devices.fcp.disk.array.rte -> 连接IBM FAStT存储设备所需要
devices.fcp.disk.array.diag -> 连接IBM FAStT存储设备所需要
(以上文件集存放于AIX光盘中。)
ibm2105.rte -> 连接IBM 2105 ESS存储设备所需要
devices.sdd.xx.rte -> 连接IBM 2105 ESS存储设备，提供多通路支持(vpath)
(这两个文件集在单独购买的SDD软件光盘中。)
2007-11-1 10:44
小猪
安装
devices.pci.df1000f7.com.5.1.0.66.bff
包
需要升级以下几个包.一个个包找一个个安装.
bos.mp 5.1.0.63 # Fileset Update
bos.mp64 5.1.0.64 # Fileset Update
bos.rte.serv_aid 5.1.0.59 # Fileset Update
devices.pci.df1000f7.com.5.1.0.66.bff
包
需要升级以下几个包.一个个包找一个个安装.
bos.mp 5.1.0.63 # Fileset Update
bos.mp64 5.1.0.64 # Fileset Update
bos.rte.serv_aid 5.1.0.59 # Fileset Update
2007-11-1 10:52
小猪
安装
S:bos.mp 5.1.0.67
S:bos.mp64 5.1.0.68
需要升级
bos.adt.include 5.1.0.63 # Fileset Update
bos.adt.prof 5.1.0.66 # Fileset Update
bos.adt.samples 5.1.0.56 # Fileset Update
bos.net.nfs.client 5.1.0.53 # Fileset Update
bos.net.tcp.client 5.1.0.54 # Fileset Update
bos.perf.tools 5.1.0.61 # Fileset Update
bos.rte.control 5.1.0.58 # Fileset Update
bos.rte.libc 5.1.0.66 # Fileset Update
bos.rte.libpthreads 5.1.0.53 # Fileset Update
bos.sysmgt.serv_aid 5.1.0.64 # Fileset Update
bos.sysmgt.trace 5.1.0.55 # Fileset Update
devices.chrp.base.rte 5.1.0.54 # Fileset Update
devices.common.IBM.ethernet.rte 5.1.0.52 # Fileset Update
;P
S:bos.mp 5.1.0.67
S:bos.mp64 5.1.0.68
需要升级
bos.adt.include 5.1.0.63 # Fileset Update
bos.adt.prof 5.1.0.66 # Fileset Update
bos.adt.samples 5.1.0.56 # Fileset Update
bos.net.nfs.client 5.1.0.53 # Fileset Update
bos.net.tcp.client 5.1.0.54 # Fileset Update
bos.perf.tools 5.1.0.61 # Fileset Update
bos.rte.control 5.1.0.58 # Fileset Update
bos.rte.libc 5.1.0.66 # Fileset Update
bos.rte.libpthreads 5.1.0.53 # Fileset Update
bos.sysmgt.serv_aid 5.1.0.64 # Fileset Update
bos.sysmgt.trace 5.1.0.55 # Fileset Update
devices.chrp.base.rte 5.1.0.54 # Fileset Update
devices.common.IBM.ethernet.rte 5.1.0.52 # Fileset Update
;P
2007-11-1 11:02
小猪
# lslpp -L |grep bos.adt
bos.adt.base 5.1.0.55 C F Base Application Development
bos.adt.data 5.1.0.0 C F Base Application Development
bos.adt.debug 5.1.0.58 C F Base Application Development
bos.adt.graphics 5.1.0.25 C F Base Application Development
bos.adt.include 5.1.0.50 C F Base Application Development
bos.adt.lib 5.1.0.35 C F Base Application Development
bos.adt.libm 5.1.0.28 C F Base Application Development
bos.adt.prof 5.1.0.50 C F Base Profiling Support
bos.adt.prt_tools 5.1.0.0 C F Printer Support Development
bos.adt.samples 5.1.0.50 C F Base Operating System Samples
bos.adt.sccs 5.1.0.25 C F SCCS Application Development
bos.adt.syscalls 5.1.0.51 C F System Calls Application
bos.adt.utils 5.1.0.3 C F Base Application Development
#
# lslpp -L |grep bos.net
bos.net.ipsec.keymgt 5.1.0.57 C F IP Security Key Management
bos.net.ipsec.rte 5.1.0.57 C F IP Security
bos.net.ipsec.websm 5.1.0.50 C F IP Security WebSM
bos.net.ncs 5.1.0.25 C F Network Computing System 1.5.1
bos.net.nfs.adt 5.1.0.50 C F Network File System
bos.net.nfs.cachefs 5.1.0.50 C F CacheFS File System
bos.net.nfs.client 5.1.0.50 C F Network File System Client
bos.net.nfs.server 5.1.0.50 C F Network File System Server
bos.net.nis.client 5.1.0.50 C F Network Information Service
bos.net.nis.server 5.1.0.54 C F Network Information Service
bos.net.snapp 5.1.0.2 C F System Networking Analysis and
bos.net.tcp.adt 5.1.0.36 C F TCP/IP Application Toolkit
bos.net.tcp.client 5.1.0.50 CE F TCP/IP Client Support
bos.net.tcp.server 5.1.0.59 C F TCP/IP Server
bos.net.tcp.smit 5.1.0.52 C F TCP/IP SMIT Support
bos.net.uucp 5.1.0.35 C F Unix to Unix Copy Program
# lslpp -L |grep bos.per
bos.perf.diag_tool 5.1.0.25 C F Performance Diagnostic Tool
bos.perf.libperfstat 5.1.0.50 C F Performance Statistics Library
bos.perf.perfstat 5.1.0.50 C F Performance Statistics
bos.perf.tools 5.1.0.50 C F Base Performance Tools
# lslpp -L |grep bos.rte.lib
bos.rte.libc 5.1.0.50 C F libc Library
bos.rte.libcfg 5.1.0.35 C F libcfg Library
bos.rte.libcur 5.1.0.51 C F libcurses Library
bos.rte.libdbm 5.1.0.0 C F libdbm Library
bos.rte.libnetsvc 5.1.0.0 C F Network Services Libraries
bos.rte.libpthreads 5.1.0.50 C F pthreads Library
bos.rte.libqb 5.1.0.0 C F libqb Library
bos.rte.libs 5.1.0.50 C F libs Library
# lslpp -L |grep bos.sysmgt
bos.sysmgt.loginlic 5.1.0.0 C F License Management
bos.sysmgt.nim.client 5.1.0.57 C F Network Install Manager -
bos.sysmgt.quota 5.1.0.27 C F Filesystem Quota Commands
bos.sysmgt.serv_aid 5.1.0.50 C F Software Error Logging and
bos.sysmgt.smit 5.1.0.58 C F System Management Interface
bos.sysmgt.sysbr 5.1.0.63 C F System Backup and BOS Install
bos.sysmgt.trace 5.1.0.50 C F Software Trace Service Aids
# lslpp -L |grep devices.chrp.base.rte
devices.chrp.base.rte 5.1.0.50 C F RISC PC Base System Device
# lslpp -L |grep devices.common.IBM.ethernet.rte
devices.common.IBM.ethernet.rte
bos.adt.base 5.1.0.55 C F Base Application Development
bos.adt.data 5.1.0.0 C F Base Application Development
bos.adt.debug 5.1.0.58 C F Base Application Development
bos.adt.graphics 5.1.0.25 C F Base Application Development
bos.adt.include 5.1.0.50 C F Base Application Development
bos.adt.lib 5.1.0.35 C F Base Application Development
bos.adt.libm 5.1.0.28 C F Base Application Development
bos.adt.prof 5.1.0.50 C F Base Profiling Support
bos.adt.prt_tools 5.1.0.0 C F Printer Support Development
bos.adt.samples 5.1.0.50 C F Base Operating System Samples
bos.adt.sccs 5.1.0.25 C F SCCS Application Development
bos.adt.syscalls 5.1.0.51 C F System Calls Application
bos.adt.utils 5.1.0.3 C F Base Application Development
#
# lslpp -L |grep bos.net
bos.net.ipsec.keymgt 5.1.0.57 C F IP Security Key Management
bos.net.ipsec.rte 5.1.0.57 C F IP Security
bos.net.ipsec.websm 5.1.0.50 C F IP Security WebSM
bos.net.ncs 5.1.0.25 C F Network Computing System 1.5.1
bos.net.nfs.adt 5.1.0.50 C F Network File System
bos.net.nfs.cachefs 5.1.0.50 C F CacheFS File System
bos.net.nfs.client 5.1.0.50 C F Network File System Client
bos.net.nfs.server 5.1.0.50 C F Network File System Server
bos.net.nis.client 5.1.0.50 C F Network Information Service
bos.net.nis.server 5.1.0.54 C F Network Information Service
bos.net.snapp 5.1.0.2 C F System Networking Analysis and
bos.net.tcp.adt 5.1.0.36 C F TCP/IP Application Toolkit
bos.net.tcp.client 5.1.0.50 CE F TCP/IP Client Support
bos.net.tcp.server 5.1.0.59 C F TCP/IP Server
bos.net.tcp.smit 5.1.0.52 C F TCP/IP SMIT Support
bos.net.uucp 5.1.0.35 C F Unix to Unix Copy Program
# lslpp -L |grep bos.per
bos.perf.diag_tool 5.1.0.25 C F Performance Diagnostic Tool
bos.perf.libperfstat 5.1.0.50 C F Performance Statistics Library
bos.perf.perfstat 5.1.0.50 C F Performance Statistics
bos.perf.tools 5.1.0.50 C F Base Performance Tools
# lslpp -L |grep bos.rte.lib
bos.rte.libc 5.1.0.50 C F libc Library
bos.rte.libcfg 5.1.0.35 C F libcfg Library
bos.rte.libcur 5.1.0.51 C F libcurses Library
bos.rte.libdbm 5.1.0.0 C F libdbm Library
bos.rte.libnetsvc 5.1.0.0 C F Network Services Libraries
bos.rte.libpthreads 5.1.0.50 C F pthreads Library
bos.rte.libqb 5.1.0.0 C F libqb Library
bos.rte.libs 5.1.0.50 C F libs Library
# lslpp -L |grep bos.sysmgt
bos.sysmgt.loginlic 5.1.0.0 C F License Management
bos.sysmgt.nim.client 5.1.0.57 C F Network Install Manager -
bos.sysmgt.quota 5.1.0.27 C F Filesystem Quota Commands
bos.sysmgt.serv_aid 5.1.0.50 C F Software Error Logging and
bos.sysmgt.smit 5.1.0.58 C F System Management Interface
bos.sysmgt.sysbr 5.1.0.63 C F System Backup and BOS Install
bos.sysmgt.trace 5.1.0.50 C F Software Trace Service Aids
# lslpp -L |grep devices.chrp.base.rte
devices.chrp.base.rte 5.1.0.50 C F RISC PC Base System Device
# lslpp -L |grep devices.common.IBM.ethernet.rte
devices.common.IBM.ethernet.rte
页: [1] 2 3 4
Powered by Discuz! Archiver 5.5.0 © 2001-2006 Comsenz Inc.