|
首先必须安装gpm软件包
要有usb的支持：
cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
usb-ohci
input
keybdev
mousedev
usbmouse
用dmesg看看：
dmesg | grep usb
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc8840000, IRQ 12
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 1
usb-ohci.c: USB OHCI at membase 0xc8842000, IRQ 12
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001
usb.c: new USB bus registered, assigned bus number 2
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
input0: Logitech USB-PS/2 Optical Mouse on usb1:2.0
已经支持拉
然后配置gpm
可用gpmconfig或edit /etc/gpm.conf
这是我的：
$cat /etc/gpm.conf
# /etc/gpm.conf - configuration file for gpm(1)
#
# If mouse response seems to be to slow, try using
# responsiveness=15. append can contain any random arguments to be
# appended to the commandline.
#
# If you edit this file by hand, please be aware it is sourced by
# /etc/init.d/gpm and thus all shell meta characters must be
# protected from evaluation (i.e. by quoting them).
#
# This file is used by /etc/init.d/gpm and can be modified by
# /usr/sbin/gpmconfig.
#
device=/dev/input/mice
responsiveness=15
repeat_type=
type=exps2
append=""
sample_rate=
多试几种组合就ok了
PS:个人认为gpm没有FreeBSD的moused易用
|
