errpt 的内容
IDENTIFIER TIMESTAMP  T C RESOURCE_NAME  DESCRIPTION
192AC071   0618143008 T O errdemon       ERROR LOGGING TURNED OFF
6D19271E   0618141608 I O topsvcs        Topology Services daemon stopped
28854E81   0618141608 I O grpsvcs        Group Services daemon stopped
99FA80C7   0618141608 U S haemd          SOFTWARE
AA8AB241   0618141608 T O clstrmgrES     OPERATOR NOTIFICATION
E465B2D9   0618140508 P S topsvcs        Cannot start. Cannot open UDP socket for
173C787F   0618140508 I S topsvcs        Possible malfunction on local adapter


最后二个的具体内容:
---------------------------------------------------------------------------
LABEL:          TS_RSOCK_ER
IDENTIFIER:     E465B2D9

Date/Time:       Wed Jun 18 14:05:33 BEIST 2008
Sequence Number: 327
Machine Id:      000CFCFD4C00
Node Id:         jx1
Class:           S
Type:            PERM
Resource Name:   topsvcs         

Description
Cannot start. Cannot open UDP socket for daemon communications

Probable Causes
System resources are not sufficient to complete the request
Port number already in use

Failure Causes
System resources are not sufficient to complete the request
Port number already in use

        Recommended Actions
        Re-start Topology Services daemon
        Re-boot the node if problem persists
        If the problem persists after re-booting the node, call IBM Service.

Detail Data
DETECTING MODULE
rsct,nim_control.C,1.39.1.1,4364              
ERROR ID
6N9PNY1hK8K6/kwk10ME.8....................
REFERENCE CODE
                                          
Daemon can not open socket because of following reason
Function bind failed
System errno value
          67
The port number used by Topology Services daemon
        6178
---------------------------------------------------------------------------
LABEL:          TS_LOC_DOWN_ST
IDENTIFIER:     173C787F

Date/Time:       Wed Jun 18 14:05:23 BEIST 2008
Sequence Number: 326
Machine Id:      000CFCFD4C00
Node Id:         jx1
Class:           S
Type:            INFO
Resource Name:   topsvcs         

Description
Possible malfunction on local adapter

Probable Causes
Local adapter mal-functioned
Local adapter lost connection to network
Local adapter mis-configured

Failure Causes
Local adapter mal-functioned
Local adapter lost connection to network
Local adapter mis-configured

        Recommended Actions
        Verify adapter configuration
        Verify network connectivity

Detail Data
DETECTING MODULE
rsct,nim_control.C,1.39.1.1,4805              
ERROR ID
6zV5DL.XK8K6/ZV910ME.8....................
REFERENCE CODE
                                          
Adapter interface name
en2
Adapter offset
           0
Adapter IP address
10.1.60.1


谁知道是怎么回事啊,是哪里出了问题!!!!

另外想问下:     LABEL:          TS_LOC_DOWN_ST
                     IDENTIFIER:     173C787F
这二个是不是固定的错误代码,那 TS_LOC_DOWN_ST是什么意思

谁能给我个拔掉网线,的错误信息啊!!!

QQQ!!

[ 本帖最后由 juxking 于 2008-6-22 00:31 编辑 ]

心跳吧

LS,能不能告诉我从哪几个关键能看出是心跳问题,心跳出了什么问题,能详细点告诉我吗?

拔网线的话，应该有Link Down的提示

你这个是应该是因为hacmp相关的错误信息

System resources are not sufficient to complete the request
Port number already in use

hacmp的通讯并不是说能ping通就说明通讯正常的。

建议查查负载啥的，优化一下配置，不行再考虑补丁之

至于咋调整，以errpt的错误提示为关键词google之，应该有不少提示

FYI

3Q,另外我想问下LABEL和IDENTIFIER的内容是不是定义一种错误的啊


另外: Cannot start. Cannot open UDP socket for(errpt的信息) 这条有点不明白,为什么会报了个UDP的错误啊,是不是HA使用UDP啊

那这个是不是和网卡相关的错误啊
LABEL:          SSA_LINK_OPEN
IDENTIFIER:     625E6B9A

Date/Time:       Wed Jun 18 17:28:57 BEIST 2008
Sequence Number: 628
Machine Id:      000CFCDD4C00
Node Id:         jx2
Class:           H
Type:            PERM
Resource Name:   ssa0            
Resource Class:  adapter
Resource Type:   ssa160
Location:        U0.1-P1-I14/Q1
VPD:            
        Part Number................. 27H1204
        FRU Number.................. 34L5388
        Serial Number...............S1272582
        EC Level....................    E28793
        Manufacturer................IBM053
        ROS Level and ID............AB00    0000
        Loadable Microcode Level....05
        Device Driver Level.........00
        Displayable Message.........SSA-ADAPTER
        Device Specific.(Z0)........SDRAM=128
        Device Specific.(Z1)........CACHE=32
        Device Specific.(Z2)........UID=006094BF00006204

Description
ADAPTER DETECTED OPEN SERIAL LINK

Probable Causes
SSA DEVICE POWERED OFF OR FAILED

User Causes
ANOTHER SYSTEM ON THE LINK HAS BEEN POWERED OFF OR AN SSA DEVICE HAS BEEN REMOVED FROM THE LINK

        Recommended Actions
        POWER ON THE OTHER SYSTEM OR REPLACE THE REMOVED DISK DRIVE

Install Causes
CABLING OR POWER FAULT

        Recommended Actions
        CHECK LINK CONFIGURATION

Failure Causes
STORAGE DEVICE CABLE
DISK DRIVE
ADAPTER

        Recommended Actions
        PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
ERROR CODE
2450 0400 0404 0000 0300 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000

[ 本帖最后由 juxking 于 2008-6-22 13:08 编辑 ]

LS,这是SSA卡，不是网卡。

3Q,农哥,那另二个问题也告诉下吧!

那是网卡有问题，诊断一下吧，有可能要换卡

不明白,如何判断出是网卡的问题啊!!!

离线diag一下

LZ。。。学好英文应该就能看出来了啊

192AC071   0618143008 T O errdemon       ERROR LOGGING TURNED OFF
6D19271E   0618141608 I O topsvcs        Topology Services daemon stopped
28854E81   0618141608 I O grpsvcs        Group Services daemon stopped
99FA80C7   0618141608 U S haemd          SOFTWARE
AA8AB241   0618141608 T O clstrmgrES     OPERATOR NOTIFICATION
E465B2D9   0618140508 P S topsvcs        Cannot start. Cannot open UDP socket for
173C787F   0618140508 I S topsvcs        Possible malfunction on local adapter

在这些错误的时间段里,是拔过网线的,为什么没报错啊!还是.......
谁帮我说明下这里7条错误的具体内容,不胜感激!(本人还在学习中,见笑)